← Steckfeld

FM-1 firmware installer

Puts Fernbedienung or Beiwagen on an M-VAVE FM-1, straight from this page.

At your own risk

Installing custom firmware is at your own risk.

Fernbedienung and Beiwagen are unofficial firmware, provided as is, without any warranty. They are not made, endorsed or supported by M-VAVE or teenage engineering. A failed or interrupted install can leave the FM-1 unable to start until it is recovered with a USB tool. You can return to the official firmware at any time (below).

Before you install

Firmware

Detailed log

        

If something goes wrong

The write stopped: reconnect the FM-1 and press Install again. It stays in update mode until the write is finished.

The firmware does not start: after two failed boots in a row the FM-1 opens USB RESCUE by itself (or switch it on holding OCT−). The installer works there too.

If power is lost mid-write, the FM-1 may stay dark with no USB device: charge it before installing.

Recovering an FM-1 that does not start: MvaveFM1Unbricker

Back to the official firmware

Writes M-VAVE's FM-1 V15 the same way. Only the unmodified official file is accepted: its SHA-256 is checked before writing, and the file never leaves your browser.

Download FM-1 V15 (Downloads → PC Firmware): m-vave.com/download

Licences

Fernbedienung and Beiwagen are free software under the GNU General Public License v3.0 only, provided without any warranty. Complete source code of these versions: Fernbedienung 1.0, Beiwagen 0.2.

Details: Fernbedienung · Beiwagen · checksums: SHA256SUMS