Contents

Connecting

This chapter connects the FM-1 to Steckfeld SF1 on an iPad or iPhone. One USB-C cable carries everything: the keys, knobs and buttons go to Steckfeld as MIDI, Steckfeld's screen comes back to the FM-1, and Steckfeld's sound plays through the FM-1's audio output.

Plug it in

  1. Install Fernbedienung on the FM-1. See Installing.
  2. Connect the FM-1 to the iPad or iPhone with a USB-C cable and switch the FM-1 on.
  3. Open Steckfeld SF1.

The FM-1 shows FERNBEDIENUNG with its version for about a second, then the waiting screen. As soon as Steckfeld answers, the FM-1 shows the part that is open in Steckfeld, and the button of that part's kind lights up.

On the iPad or iPhone the FM-1 appears as a USB MIDI device and as a USB audio device, both named Fernbedienung FM-1.

The waiting screen

Until Steckfeld answers, the header says FERNBEDIENUNG and the picture area says what is missing:

# Message Meaning
1 No USB connection / Plug the FM-1 into the iPad The FM-1 sees no USB host. Check the cable and the port.
2 Steckfeld not connected / Open Steckfeld SF1 on the iPad USB is up, but Steckfeld hasn't answered yet. Open Steckfeld SF1.

The four tiles below show MIDI CHANNEL, OCTAVE, VELOCITY and USB AUDIO, and the footer says EDIT settings. The keys, knobs and buttons still send MIDI while the FM-1 waits, so the keys play any app that listens.

When it is connected

  • The FM-1 shows the part that is selected in Steckfeld. Select another part in Steckfeld and the FM-1 follows.
  • Steckfeld keeps the iPad's or iPhone's screen from going dark while the FM-1 is connected.
  • The button of the shown part's kind is lit. Buttons of kinds that have no part in the bay have no backlight. See Controls.
  • If Steckfeld's sound goes somewhere other than the FM-1, the footer says so in amber and REC switches it. See Audio interface.

Unplug the cable or close Steckfeld and the FM-1 goes back to the waiting screen. Plug it back in or open Steckfeld again and the two find each other by themselves.

Versions must match

The FM-1 and Steckfeld compare their protocol versions when they connect. If they differ, the FM-1 shows UPDATE NEEDED and Steckfeld sends it nothing else. See Screens.

Advanced

For when you know the basics. You don't need this to get started. Skip to Controls

Use another MIDI controller alongside

Steckfeld treats knobs and buttons as FM-1 controls only when they come from the FM-1. A second controller plugged in at the same time reaches Steckfeld as ordinary MIDI, even if it sends the same CC numbers as the FM-1 (20 to 29, 40 to 47 and 50 to 57). You can map it to Steckfeld's knobs as usual.