Steckfeld SF1 manual
- 1. Getting started
This chapter covers what you see when you open Steckfeld SF1, how the demo unit works, how to buy and restore the app, and how to get a first sound out of it. The other chapters go into each part of the device.
- 2. The bay
The module bay holds the patch: every module in it and every connection between them. This chapter covers how the bay is laid out, how to take parts from the parts display and set them down, how to move and remove modules, and how to connect them.
- 3. The programmer
The programmer is the handheld unit you edit modules with. It has one large display, four knobs standing through the glass, five keys and an E/R rocker. This chapter covers how to bring it in, how its knobs and keys work, and how to route connections on it. What each module's pages hold is in the module reference, starting with Sources.
- 4. Patches and the library
A patch is everything in the bay: the modules, where they sit, their settings, the connections, the tempo and the Output's volume, drive and tone. The library is where patches are filed by name. You work with it on Kabelmaier's terminal, a handheld with a text screen, five soft keys and a small keyboard. This chapter covers finding and loading patches, saving your own, and naming and deleting them.
- 5. MIDI and clock
The SF1 has no keyboard of its own. You play it from MIDI gear or another app, and it can run on its own clock, follow MIDI clock or join an Ableton Link session. This chapter covers connecting MIDI gear, playing notes, the transport and tempo, clock sync, turning the programmer's knobs from a controller, and using an M-VAVE FM-1 as a remote.
- 6. Audio
The SF1 plays in stereo through whatever output iOS has chosen, or through outputs you pick on an audio interface. It can also take audio in from the microphone or an interface. This chapter covers the output level, choosing outputs, the audio input, latency, and playing in the background or alongside other apps.
- 7. The terminal and the crews
Four crews write firmware for the SF1 and hand it out on their own dial-up boards. You call the boards from Kabelmaier's terminal, the same handheld you manage the library with. A ROM you download puts the crew's module into the parts tray. This chapter covers dialling a board, downloading free ROMs and buying paid ones.
- 8. The service menu
The service menu holds the device's settings: audio, clock, MIDI and the theme. It shows on the parts display and you walk it with the keypad. This chapter lists every row with its values and default. The settings are kept on the device, apply to every patch, and take effect as soon as you change them.
- 9. Troubleshooting
This chapter lists common problems with the SF1 and what to check for each, starting with sound, then MIDI and clock, the bay, and buying. Each answer links to the chapter that explains the part involved.
- 10. Sources
Sources make the sound everything else works on. Analog, Wavetable, FM and String are played by notes; Audio In brings the device's hardware input into the patch. They are listed on the SOURCES page of the parts display, together with the crew sources ДАМП, 曲げ MAGE and SCHLIERE, which have their own chapter (Crew modules). A patch can hold up to four of each source. Percent controls read 0 to 100 on the programmer's display, without a % sign.
- 11. Filter, EQ, compressor and distortion
These four effects change the tone and level of a signal: the Filter, the three-band EQ, the compressor (Comp) and the distortion (Dist). Each takes audio in on one connection and puts audio out; you can chain them in any order, and a patch can hold up to four of each. They are on the EFFECTS page of the parts display, with the time-based effects in Chorus, delay, reverb and grain. Percent controls read 0 to 100 on the display.
- 12. Chorus, delay, reverb and grain
These four effects work with time: the Chorus (which also does flanging and phasing), the Delay, the Reverb and Grain, which plays a cloud of short slices from the last few seconds of audio. Each takes audio in on one connection and puts stereo audio out, with its own dry/wet mix; a patch can hold up to four of each. They are on the EFFECTS page of the parts display, with the effects in Filter, EQ, compressor and distortion. Percent controls read 0 to 100 on the display.
- 13. MIDI In, sequencer, arp and chord
These four utilities decide which notes the sources play. MIDI In turns a keyboard or controller into notes, the Sequencer plays a pattern of up to 32 steps, the Arp plays the keys you hold one after another, and Chord turns every note it passes on into a chord. All of them put out a control signal and reach a source over a connection set to Note + Gate. They are on the UTILITIES page of the parts display; a patch can hold up to four of each. Percent controls read 0 to 100 on the display.
- 14. LFO and envelope
The LFO and the Envelope move other modules' settings over a control connection: the LFO in a repeating cycle, the Envelope once per note. This chapter also lists how far a control connection moves each destination, which is the same for an LFO, an Envelope and the mod wheel of a MIDI In. Both modules are on the UTILITIES page of the parts display; a patch can hold up to four of each. Percent controls read 0 to 100 on the display.
- 15. Mixer and output
The Mixer is the rack's junction: it passes a signal on, splits it, merges several, crossfades between what it merges, and takes a connection round a corner. The Output is the amp and speaker every patch ends in, with the device's tempo and output ports on its pages. The Mixer is on the UTILITIES page of the parts display; the Output is never in the parts tray, because it is already in every patch.
- 16. Crew modules
Some modules run firmware written by the crews whose boards you dial from the terminal, not by Steckfeld: ДАМП from СЕКТОР, 曲げ MAGE from KAIRO, SCHLIERE from RASTER and COMBINÉ from LIGNE, all four built on perfboard, and the Macro, a prototype board from СЕКТОР with an antenna. The Macro is in every device from the start. The other four appear in the parts tray once you have downloaded their ROM from the crew's board, which is free (see Download a ROM). On the programmer, a crew's module is drawn by its own firmware, in the crew's colours and language. Percent controls read 0 to 100 on the display.