Contents

Audio interface

This chapter covers the FM-1 as Steckfeld SF1's audio output. The USB-C cable that carries the controls also carries the sound, so you plug headphones or a mixer into the FM-1. On an iPhone, with its single port, that gives you a controller and wired headphones without a hub.

How the sound gets there

# Path From To
1 Sound Steckfeld SF1 The FM-1's audio output, at the volume set with MASTER
2 Control The FM-1's keys, knobs and buttons Steckfeld SF1, over USB-MIDI

MASTER sets the volume; all the way down is silence. If you pick outputs by hand in Steckfeld, use outputs 1 and 2 of the FM-1. It ignores the others.

Play through the FM-1

When the FM-1 is connected, iOS lists it as an audio device. If Steckfeld's main output is something else, for example the iPad's speaker, the FM-1's footer shows a notice in amber:

  • Sound on iPad when the sound goes to the built-in speaker.
  • Sound on and the device's name when it goes to another output.

Press REC (use FM-1) and Steckfeld switches its main output to the FM-1. Nothing changes until you press it, so in a bigger setup you can leave the sound where it is and ignore the notice. The notice doesn't show when the FM-1 is already Steckfeld's main or second output.

How Steckfeld picks its output is explained in the Steckfeld SF1 manual: Choose the output.

USB audio state

The FM-1 shows the state of the USB audio in the footer (USB audio) when nothing else is there, and in the USB AUDIO tile on the waiting screen.

# State Meaning
1 On Sound is arriving from the iPad or iPhone.
2 Waiting iOS has opened the FM-1's audio, but no sound has arrived yet.
3 Off iOS isn't playing to the FM-1.

Recording the FM-1

The FM-1 also offers a stereo audio input to the iPad or iPhone. It carries what the FM-1 plays, after MASTER. Steckfeld doesn't need it; it is there for apps that want to record the FM-1's output.