Contents

Screens

This chapter explains what the FM-1's screen shows: the Edit screen of a part, the Route screen with its cables, the patch list, the macro, notices, the FM-1's own settings and the messages it shows before Steckfeld SF1 answers.

Layout

Every screen while connected has four areas, top to bottom:

# Area What it shows
1 Header The part's name, the page's name, a dot per page, ARMED when a macro step is armed, and EDIT or ROUTE on the right
2 Picture A picture of the part, or the cables on Route
3 Tiles Four tiles, one per knob: name, value and a bar for where the value stands
4 Footer What REC and SAVE do here, a notice, or the MIDI channel and USB audio state

The colours follow Steckfeld's own display: blue by day, red in the dark. See Settings.

Edit screen

The Edit screen shows the part that is open in Steckfeld.

  • Header: the part's name in capitals. If the part has more than one page, a dot per page shows where you are (the filled one), and the page's name stands next to the dots when there is room.
  • Picture: the part drawn the way Steckfeld's display draws it: a waveform, a filter curve, an envelope, the steps of a sequencer and so on. It moves while the sound plays or a cable modulates the part.
  • Tiles: the four values of the page. KNOB 1 is top left, KNOB 2 top right, KNOB 3 bottom left, KNOB 4 bottom right. The bar under each value shows where it sits in its range. When a cable modulates the value, a short tick on the bar shows where it plays right now.
  • Footer: the labels of REC and SAVE on this page (see Controls), or, when neither does anything here, MIDI ch and USB audio.

Pictures

The FM-1 draws its own picture for these parts:

# Kind Parts
1 Sound sources Oscillator, wavetable, FM, string, grain
2 Effects Filter, EQ, compressor, distortion, chorus, delay, reverb
3 Control LFO, envelope, sequencer, arp, chord, macro
4 In and out MIDI In, audio in, mixer, output

Some pictures are simpler than in Steckfeld: the MIDI In part shows its 16 channels as two rows of eight, the sequencer has no step numbers, the envelope has no A D S R labels, and the macro shows only its title, status, four encoder rows and the cursor line.

ДАМП, 曲げ MAGE, SCHLIERE and COMBINÉ have no picture in Fernbedienung 1.0. The picture area stays empty; the header, tiles and knobs work as usual.

Route screen

Tap the button of the kind already shown and Steckfeld switches the part to Route. The header turns amber with ROUTE on the right, and the picture area lists the part's cables, four at a time.

Each row shows:

# Mark Meaning
1 Filled square The cable is on.
2 Empty square The cable is off.
3 Arrows pointing right The cable goes out of this part.
4 Arrows pointing left The cable comes into this part.
5 Name The part at the other end.
6 Detail on the right AUDIO or CV, and what the cable goes into.

The selected cable has a frame. ALGORITHM moves the selection. Small marks at the right edge show that there are more cables above or below. A part without cables shows No cables here.

On this screen REC switches the selected cable on or off (CABLE ON / CABLE OFF) and SAVE flips it (FLIP) where that is possible. The tiles still show and change the four values of the page.

Patch list

Turn PRESETS to open the patch list. It covers the picture and the tiles and shows eight patches at a time, sorted by name, with the patch loaded now selected.

  • Header: PATCHES and the category filter, for example PATCHES / ALL or PATCHES / BASS.
  • Rows: the patch's name, its category on the right, and a SEQ mark on patches that play a sequence of their own, not only notes from MIDI In. The selected row is shown in reverse. A name that is too long for its row scrolls slowly back and forth.
  • Footer: REC load and PRESETS browse.
# Control In the patch list
1 PRESETS Move through the list
2 SELECT Change the filter: ALL, BASS, KEYS, LEAD, PAD, STRINGS, PLUCK, FX, PERC. It stops at both ends. The selected patch stays selected if the new filter still lists it.
3 REC Load the selected patch and close the list. The patch replaces the whole bay.
4 Keys, OCT− / OCT+ Play as usual; the list stays open.
5 Any other knob or button Close the list without loading, and do its usual job.

An empty filter shows No patches.

Macro

HOME shows the macro when there is one in the bay. The picture shows the macro's four encoder rows and its cursor. REC arms a step (ARM) or cancels it (ABORT); while a step is armed, ARMED blinks in the header. SAVE writes the step (WRITE).

Notices

When something in Steckfeld stands in the way of the FM-1, Steckfeld puts a short notice in the footer, in amber. If there is something to do about it, the action stands on the right next to REC, and REC does it. The FM-1 never changes a Steckfeld setting by itself; only REC on the notice does.

# Notice REC When
1 Sound on iPad use FM-1 Steckfeld's sound goes to the iPad's speaker, not to the FM-1.
2 Sound on (device) use FM-1 Steckfeld's sound goes to another output, for example headphones or another interface.
3 Clock: external (none) You pressed PLAY while Steckfeld follows an external MIDI clock. Shown for three seconds.

While a notice with an action shows, REC does that action instead of the page's own. See Audio interface.

FM-1 settings page

EDIT opens the FM-1's own settings. The header says FM-1 SETTINGS, the picture says Knobs 1-4 change these and Saved when you leave this page, and three tiles show MIDI CHANNEL, VELOCITY and OPEN. The footer shows EDIT back and the firmware version. See Settings.

System settings

Hold HOME and press EDIT. A black screen titled SETTINGS shows LIGHTS with its level as eight segments, and THEME. The footer says SELECT pick ALGO change. See Settings.

Waiting

Before Steckfeld answers, the header says FERNBEDIENUNG and the picture says either No USB connection or Steckfeld not connected. See Connecting.

Update needed

If the FM-1 and Steckfeld speak different protocol versions, the header says UPDATE NEEDED and the picture says which side is older:

# Message What to do
1 Update the FM-1 Steckfeld is newer. Install the Fernbedienung version that goes with it. See Installing.
2 Update Steckfeld SF1 The FM-1 is newer. Update Steckfeld SF1 from the App Store.

The second line shows both versions, for example Protocol: Steckfeld 2, FM-1 1. The keys still play notes, but Steckfeld ignores the FM-1's knobs and buttons until the versions match.

Advanced

For when you know the basics. You don't need this to get started. Skip to Audio interface

Names that show cut or empty

The FM-1 shows part names up to 23 characters and page names up to 13; longer ones are cut. It only shows plain Latin letters, digits and common symbols. × shows as x, − as - and ♯ as #, and other characters are left out, so names in Cyrillic or Japanese, such as ДАМП, show shortened or empty. Name your patches in plain Latin letters if you want to read them on the FM-1.