Contents

Settings

This chapter covers the FM-1's own settings: the MIDI channel, velocity and OPEN on the EDIT page, and the button lights and theme in the system settings. Steckfeld SF1 never changes these; you set them on the FM-1, and the FM-1 tells Steckfeld.

EDIT page

  1. Press EDIT. The button lights up and the screen shows FM-1 SETTINGS.
  2. Turn the knob under each tile to change it:
# Knob Setting Range Default
1 KNOB 1 MIDI CHANNEL 1 to 16 1
2 KNOB 2 VELOCITY 1 to 127 100
3 KNOB 3 OPEN Always, Never Always
  1. Press EDIT again, or any part button, to leave. The FM-1 stores what you changed and sends it to Steckfeld.

Storing the settings interrupts the sound for a moment. Change them while nothing plays.

While the page is open, the other knobs and buttons don't reach Steckfeld, and REC, SAVE and PLAY do nothing. The keys and OCT− / OCT+ keep working. The page's footer shows the firmware version.

MIDI channel

The channel all keys, knobs and buttons send on. Steckfeld listens to the FM-1 on whatever channel it uses, so you only need to change it if other gear on the same MIDI setup expects a particular channel. Steckfeld's MIDI In part must listen on this channel, or on ALL, for the keys to play.

Velocity

The keys aren't velocity-sensitive. Every note goes out at this velocity.

OPEN

Whether Steckfeld's programmer opens on the iPad when you work from the FM-1.

# Value What happens
1 Always When you pick a part on the FM-1, Steckfeld opens its programmer on that part.
2 Never While the FM-1 is connected, Steckfeld never opens its programmer, not even when you tap a part in Steckfeld. The whole iPad screen stays with the bay.

Either way, a part you select in Steckfeld is shown on the FM-1 right away.

System settings

The system settings hold what isn't specific to Steckfeld.

  1. Hold HOME and press EDIT. A black screen titled SETTINGS appears.
  2. Turn SELECT to pick LIGHTS or THEME.
  3. Turn ALGORITHM to change it.
  4. Press HOME or EDIT to close. The FM-1 stores what you changed.

While the system settings are open, the keys and the sound keep running, but the knobs and buttons do nothing else.

# Setting Values Default
1 LIGHTS OFF, 1 to 8 4
2 THEME SYNC, LIGHT, DARK SYNC

Lights

The brightness of the button backlight. Part buttons whose kind isn't in the bay stay dark at every level.

Theme

# Value Screen colours
1 SYNC Follow Steckfeld: blue when Steckfeld is light, red when it is dark. Blue while Steckfeld isn't connected.
2 LIGHT Always blue.
3 DARK Always red.

With SYNC, Steckfeld's own appearance setting decides: light, dark, or the iPad's system setting. When you change the theme on the FM-1, it tells Steckfeld.