Contents

Getting started

This chapter covers what you see when you open Steckfeld SF1, how the demo unit works, how to buy and restore the app, and how to get a first sound out of it. The other chapters go into each part of the device.

What you need

Steckfeld SF1 runs on iPhone and iPad with iOS 18 or later. On iPhone it runs in portrait, on iPad in landscape. It always fills the whole screen and hides the status bar.

Nothing on the device plays notes by itself unless a patch has a sequencer in it. To play the SF1 like a keyboard instrument you need a MIDI keyboard or controller, connected by USB, Bluetooth, a MIDI interface or the network, or another app that sends MIDI. See MIDI and clock.

The device on screen

The SF1 is drawn as one piece of hardware. From top to bottom:

# Part What it does
1 Name plate The top of the casing. It only shows text if the app couldn't start its audio engine.
2 Module bay Four rows of slots holding the modules of the current patch. The lights between modules show the connections. See The bay.
3 Output meter The glass strip right of the bay. It shows the output level in decibels and holds the last peak for a moment.
4 Parts display Bottom left. Lists the parts you can put into the bay, the patch map, or the service menu.
5 Keypad Bottom right, nine keys. Walks the parts display and opens the library and the service menu.

Two handheld tools come in over the casing when you need them:

# Tool How it comes in Chapter
1 Programmer Tap a module in the bay. The programmer
2 Terminal Press LIB on the keypad. Patches and the library

On iPhone the bay shows four columns at a time and scrolls sideways. On iPad it shows as many whole columns as fit, up to all twelve.

The keypad

# Key What it does
1 ▶ (top left) Starts and stops the transport: sequencers, arpeggiators and anything synced to the clock.
2 ▲ and ▼ ▲ goes to the previous group on the parts display, ▼ to the next. In the service menu they move up and down the rows.
3 ◀ and ▶ (middle row) Through the parts of a group, or through the modules on the patch map. In the service menu, they change the value.
4 OK Takes the part under the cursor. In the service menu, it runs the row's action.
5 LIB Brings in the terminal with the patch library, or sends it away. The key stays down while the terminal is out.
6 SVC Swaps the parts display for the service menu and back. The key stays down while the menu is open.

The key bottom left is blank and does nothing. Keys react when your finger touches them, not when you lift it.

The demo unit

Until you buy it, the SF1 is the shop's demo unit. It sits in clear plastic packaging with a price label on it, and its displays still have their protective films on.

The packaging leaves two things free: the module bay and the ▶ key, which has a hole cut over it and a TRY ME! sticker pointing at it. Press ▶ to hear the demo patch, SLOW CURRENT: a slow pad in minor seventh chords with a plucked string over it.

You can tap modules in the bay and turn their knobs on the programmer. The rest of the keypad is under the plastic. The films on the displays lift a little at their red tab and slip back on.

Whenever you leave the app and come back, the demo unit is set back to SLOW CURRENT with the transport stopped. Nothing you change is kept.

Buy the SF1

  1. Tap the price label at the top right of the packaging. A shop bill comes up from the bottom of the screen.
  2. Tap BUY and confirm the purchase with the App Store.
  3. The bill is stamped BEZAHLT and its status line reads THE FILMS COME OFF NOW. Tap beside the bill to put it away.

The packaging comes off and the whole keypad works. The SF1 is a one-time purchase.

If you bought it before on the same Apple account, tap RESTORE on the bill instead of BUY.

The status line on the bill tells you what the store is doing:

# Status line Meaning
1 NOT YET PAID The store answered and the app isn't bought on this account.
2 ASKING THE STORE A purchase or restore is in progress.
3 WAITING FOR APPROVAL The purchase is pending, for example while Ask to Buy waits for a parent.
4 THE STORE DOES NOT ANSWER The app couldn't get the price from the App Store. BUY is dimmed. Check your connection, then tap RESTORE, which asks the store again.
5 THE FILMS COME OFF NOW Bought.

Any other text on the status line is the App Store's own error message.

Peel off the films

Once the SF1 is bought, the films on the parts display and on the programmer's screen come off. Drag the red tab at a film's top left corner across the display. Let go before half way and the film lies back down. Past half way it tears off and drops away. Each film comes off once and stays off.

You don't have to peel them. The displays work the same with the films on.

Make a first sound

  1. Press ▶. On a bought device the bay holds whatever patch was in it last; on a new one it's SLOW CURRENT. If the patch has a sequencer, it starts playing.
  2. If nothing plays, the patch waits for notes. Connect a MIDI keyboard and play it. See Play from a MIDI keyboard.
  3. To change the sound, tap a module in the bay. The programmer comes in. Drag one of its four knobs up or right to turn it up.
  4. To try other sounds, press LIB, walk the list with the terminal's ↑ and ↓ keys and press ↵ to load a patch. See Patches and the library.

To stop all sound at once, tap the Output module, then the PANIC key on the programmer. See Stuck notes.

What the SF1 keeps

Once the SF1 is bought, the bay is kept as you go. When you open the app, it's as you left it, even if iOS closed the app in between.

The service menu settings, the films you peeled, the library and your downloaded ROMs are kept on this device only. They aren't shared with your other devices, and deleting the app deletes them. Purchases are kept by the App Store and come back with RESTORE.

If a purchase is refunded, the packaging and the films come back.

The casing wears

The casing wears with use. After 2, 10 and 30 hours of play it looks more worn: scratches, rust, rubbed keys. Only time with the app open on a bought SF1 counts. A new level shows the next time you open the app.